Flow Rate Calculator

What Flow Rate is for

Flow Rate Calculator is the page to open when you need flow rate from measurements you already have. It belongs with the other construction calculators because that is the work this arithmetic supports. The heating load for that space is the furnace BTU calculator. Type the entries first. The result stays hidden until you press Calculate, so a half-finished form never flashes a number you might mistake for the answer.

How to fill in this calculator

1. Pipe Diameter. Enter the value this part of the job needs. The unit list on this field includes in, ft, mm, cm, m.
2. Velocity. Enter the value this part of the job needs. The unit list on this field includes ft/s, m/s.

The formula in plain language

The Flow Rate result is the standard relationship for this job, applied to the numbers you type and the units on those fields. Job-site math fails most often on the unit, not the formula. Feet times feet times inches is not a volume anyone can order. Convert each edge to feet first, then multiply, then turn cubic feet into cubic yards by dividing by 27. Read the result in the unit the supplier sells. Add a waste allowance yourself if the form does not ask for one, because cutting and spillage are real and the formula is for the neat shape.

A worked example

Suppose Pipe Diameter is 12 and Velocity is 8, in the units already selected on those fields. Press Calculate and write down the flow rate result. Change only Pipe Diameter to 24 and calculate again. If the result scales the way the formula says it should, the page is reading the form the way you intended. If it jumps by a factor of twelve, the unit on that field is still set to inches while you were thinking in feet, or the other way around.

Airflow, pipe volume, and heating load describe the same room. This flow rate figure goes with tank volume and pipe volume.

Mistakes that move the answer

• Leave the unit selector on the unit you actually measured.
• Press Calculate only after every required field is filled. An empty field is not a zero unless you typed zero.
• Round the result to the precision you can buy or build. Extra decimals do not make a tape measure more accurate.

How to check the result

After Calculate shows the flow rate result, redo the last operation with a pencil using the rounded figures on the screen. Matching that check means the inputs were read correctly. If you edit a label or a sentence in this HTML file, reload the page. The form and this article both live in the file, so the edit is what visitors will read.